KOVA CT-11A PU ROOFING AND FLOOR WATERPROOFING
PRODUCT DESCRIPTION KOVA CT-11A PU ROOF DECK WATERPROOFING
KOVA CT-11A PU ROOF DECK WATERPROOFING is an environmentally friendly, water-based, single-component waterproofing compound. With superior waterproofing performance and strong UV resistance, the product is an ideal solution for roof decks and open terraces, helping to protect surfaces durably against all harsh weather conditions. In particular, with high elasticity, it helps protect the waterproofing membrane from cracks caused by weather conditions, effectively preventing leaks and extending the lifespan of the structure.
- High elasticity.
- Good UV resistance.
- Good adhesion.
- Resistant to harsh weather, salt, and alkali.
- Easy to use, no mixing required, direct application.
- Free from harmful substances, lead, and mercury.
- Low VOC content.
PRODUCT INFORMATION KOVA CT-11A PU ROOF DECK WATERPROOFING
Packaging:5 kg and 22 kg pails.
Colors: Gray and White.

Applicable surfaces: Cement mortar, concrete.
Theoretical yield perm: 1.2–1.4 kg/ m2/ 2–3 coats.
Thickness: 400–500 µm, under normal construction conditions.
APPLICATION INSTRUCTIONS KOVA CT-11A PU ROOF DECK WATERPROOFING
Recommended product system:
- Primer coat (1 coat): KOVA CT-11A PU Roof Deck waterproofing compound diluted with 10% water.
- Waterproofing coat (02 - 03 coats): KOVA CT-11A PU Roof Deck waterproofing compound.
Surface preparation:
- Concrete and cement floor surfaces: must meet the required strength grade and be free of peeling. Allow the cement mortar and concrete structure to stabilize (minimum 21 days).
- Grind flat, create a rough surface, clean thoroughly, and check the surface moisture before application.
Application: Stir KOVA CT-11A PU Roof Deck waterproofing compound thoroughly before application.
Step 1 - Apply the primer coat: Dilute KOVA CT-11A PU Roof Deck with 10% clean water. Stir the mixture thoroughly. Apply at a rate of 0.2 – 0.3 kg/m2.After 3 – 4 hours, apply the next coat.
Step 2 - Apply the top coat: Apply 2 – 3 coats of KOVA.
For other surfaces, please contact KOVA technical support for detailed advice.
- For old concrete and cement surfaces: remove oil, grease, moss, mold, old paint, dust, and weathered cement layers. Use KOVA CT-11A Plus Floor as a primer before applying KOVA CT-11A PU Roof Deck top coats.
- The product fully cures after 7 days.
- Surfaces must be ground flat and any hollows, recesses, and rough areas treated before application.
- Suitable for surfaces that may hold water for short periods.
- Do not apply KOVA CT-11A PU Roof Deck waterproofing compound in the rain or during high-humidity weather.
- For wall sections, floor areas, or areas prone to cracking, use additional reinforcement mesh when applying the product.
- Use KOVA CT-14 to treat cracks before applying top coats.
- Clean tools with clean water immediately after use.
SAFETY, HEALTH, AND ENVIRONMENTAL INFORMATION
Ensure the work area is well ventilated. Wear gloves, a mask, and eye protection during application. If paint gets into the eyes, rinse with plenty of clean water and seek medical attention immediately. Please refer to the latest technical and safety documents before use.
Attachment KOVA CT-11A PU ROOFING AND FLOOR WATERPROOFING