MASTIC EPOXY KOVA KL-5 FLOOR
PRODUCT DESCRIPTION
SUPERIOR CHARACTERISTICS
- Load bearing, high wear resistance, waterproof.
- Light back pressure, water resistant, mild chemical resistant.
- Good adhesion to concrete surface to make the connection layer between industrial paint EPOXY KOVA KL-5 floor and concrete.
- Non-flammable, non-toxic, free of lead, mercury and other harmful chemicals, safe for construction and use
PRODUCT INFORMATION
Packing : 5kg carton (set of 3 components); Part powder: 2.5kg ; Liquid part: 2.0kg ; Additives: 0.5kgApplicable surface : Concrete surfaces, cement mortar.
Theoretical norm: 1 - 1.5mm (for 2 layers), under normal construction conditions.
CONSTRUCTION INSTRUCTIONS
SURFACE PREPARATION
-
All surfaces must be cleaned of dirt, grease, moss, lime, old paint. Then rinse the floor with clean water.
- Step 1: Take the powder ingredients and slowly add them to the liquid, stirring while pouring. Then add all the additives and stir well. Let stand 3-5 minutes for the additive to react, stir again.
- Step 2: Apply 2 layers of mastic KOVA KL-5 floor, each layer is separated by 12 hours. Allow to dry, then use sandpaper to sand flat, clean dust. Allow to dry for at least 24 hours before applying industrial paint EPOXY KOVA KL-5. Mastic KOVA KL-5 floor will reach maximum hardness after 7 days
-
The mastic must be used up within 45 minutes of mixing the 3 ingredients, after which time the mastic will solidify. Where to apply, mix mastic there
Agents with accounts please log in to purchase or register an account ( here ).
If you are not yet an agent in the Cuong Lam system, please contact us ( here ).